BJVNG - 0292 TOOL-SAVER
- MSDS: BJVNG
- Manufacturer: DOALL CO
- Product Name: 0292 TOOL-SAVER
- National Stock Number: 9150-00F014629
Product Identification
Product ID:0292 TOOL-SAVER
MSDS Date:02/03/1992
FSC:9150
NIIN:00F014629
MSDS Number: BJVNG
Responsible Party
DES PLAINES, IL 60016-4321
US
Emergency Phone: 708-803-7262
Info Phone: 708-803-7331
Preparer: R. R. ROGERS
Cage: 18056
Contractor
Telephone: 847-803-7366
Cage: 18056
Ingredients
HYDROTREATED PARAFFIN WAX
CAS: 64742-51-4
Fraction By Weight: 40%
PETROLEUM OIL, HYDROTREATED HEAVY NAPHTHENIC DISTILLATE
CAS: 64742-52-5
RTECS: PY8035001
Fraction By Weight: 36%
OSHA PEL 5 MG/CUM
ACGIH TLV: 5 MG/CUM
PARAFFIN WAXES & HYDROCARBON WAXES, MICROCRYST *93-4*
CAS: 63231-60-7
Fraction By Weight: 16%
FATS, TALLOW *92-2*
CAS: 61789-97-7
Fraction By Weight: 5%
CARNAUBA WAX *93-4*
CAS: 8015-86-9
Fraction By Weight: 2%
NAPHTHENIC ACID, ZINC SALT
CAS: 12001-85-3
RTECS: OK9275000
Fraction By Weight: 1%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: MINOR IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: BREATHING DIFFICULTY. SKIN:
DEFATTING. INGESTION: NAUSEA & DIARRHEA.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. IF NECESSARY, SUPPORT
BREATHING. EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH AREA W/MILD
SOAP & WARM WATER ONLY. DON'T USE HARSH SOAP OR SOLVENT. INGESTION:
KEEP WARM & QUIET. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:COC
Flash Point:350F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:WATER STREAM OR SPRAY MAY SPREAD FIRE IF USED
TO COOL CONTAINERS TO PREVENT VAPOR FORMATION & IGNITION. FOG
NOZZLES ARE PREFERRED IF WATER IS USED. WEAR SCBA.
Accidental Release
Spill Release Procedures:SMALL: USE ABSORBENT MATERIAL. LARGE: DIKE &
PUMP INTO DRUMS. RESIDUE: MOP W/SOAP & WATER.
Handling
Handling and Storage Precautions:STORE DRY IN A CLOSED CONTAINER IN A
COOL PLACE AWAY FROM ANY FIRE SOURCE.
Other Precautions:AVOID BREATHING MIST. TO AVOID INJURY, DON'T APPLY TO
MOVING TOOL.
Exposure Controls
Ventilation:GENERAL MECHANICAL: ADEQUATE. IF MISTING OCCURS, PROVIDE
LOCAL VENTILATION.
Protective Gloves:NEOPRENE; IMPERMEABLE TO OIL
Eye Protection:SAFETY GOGGLES OR FACE SHIELD
Other Protective Equipment:EMERGENCY SHOWER & EYEWASH
Work Hygienic Practices:OIL-SOAKED CLOTHING SHOULD BE CHANGED PROMPTLY
& LAUNDERED BEFORE RE-WEARING. PRACTICE REASONABLE PERSONAL
HYGIENE.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:0.9
Solubility in Water:INSOLUBLE
Appearance and Odor:TAN SOLID W/OILY ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Hazardous Decomposition Products:OXIDES OF CARBON & SULFUR COMPOUNDS
Disposal
Waste Disposal Methods:TREAT AS AN OILY WASTE & DISPOSE OF IN
ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.